Made a bad mistake, when I found out I had a bad DMA chip in the STe, I decided to look in my STFM to see what that had
and noticed that the chip just slips into a socket (So I assumed the STe would be the same). However when I opened the
STe to fit the new chip I found out that its soldered to the motherboard (Nearlly all ST's are soldered).
I don't have a soldering kit and I have no experience, so i'm not going to attempt this. Just thought I'd post this to
let anyone with an ST know that if you plan to add a hard drive or anything to the DMA Port make sure you
check the DMA chip first.
Looks like I'll have to buy another Ste off eBay